2004 Dodge Dakota Owner's Manual - Page 256
2004 Dodge Dakota Manual
Page 256 highlights
256 MAINTAINING YOUR VEHICLE 4. Remove the bolts attaching the headlamp to the inner fender panel. 5. Grasp the headlamp and pull firmly to disengage it from the panel. 6. Disconnect all connectors and separate the headlamp module from the vehicle 7. Remove the retaining ring holding the bulb to the headlamp. 8. Pull the bulb socket from the headlamp and pull the bulb from the socket. NOTE: These are Halogen bulbs. Take care not to touch the bulb with your fingers. Parking/Turn Signal Lights 1. Remove the screw as shown and pull the parking/ turn signal housing out. 2. Turn the bulb and socket assembly 1/4 turn and pull to remove socket from housing. 3. The bulb can be removed from the socket by pulling straight out. NOTE: Body oils from your fingers could cause excessive heat buildup which reduces bulb life. Rear Side Marker, Tail Lights, Turn Signals And Backup Lights - Replacement 1. Remove the screws as illustrated. Grasp the tail light housing and pull it rearward.