2009 Dodge Journey Owner's Manual - Page 221

UNDERSTANDING YOUR INSTRUMENT PANEL 219 this display. Press and release the button once to turn on the display. Press and release it again to turn off the display. Setting Compass Variance (Mid Line Cluster Only) Compass Variance is the difference between magnetic North and geographic North. To allow the compass module to compensate for that difference and ensure accuracy, you can set the variance in the compass module to the zone where the vehicle is located according to the Compass Variance Map. To set the variance, perform the following procedure. NOTE: • Magnetic materials should be kept away from the top of the instrument panel, as this is where the compass sensor is located. • The shift lever must be in PARK to enter the variance setting mode. To set the variance, first, turn the ignition switch to the ON position. Next, press and hold the COMPASS/ TEMPERATURE DISPLAY button until the current variance zone number displays (approximately 10 seconds). Then, press and release the button to increment the variance value by one, until the proper variance zone is selected according to the map. Finally, turn the ignition switch to the LOCK position to exit this mode. 4