2009 Dodge Journey Owner's Manual - Page 402

400 WHAT TO DO IN EMERGENCIES seated on component 2. This will make it easier to rotate the assembly when operating the winch mechanism. 2. Fit the assembled jack-handle over the winch drive nut located in the jack storage area. Rotate the jackhandle assembly counterclockwise until there is enough cable slack to allow you to pull the cable and retainer out from underneath the vehicle. CAUTION! The winch mechanism is designed for use with the jack-handle only. Use of an air wrench or other power tools is not recommended and it can damage the winch. 3. Place the spare tire near to the winch cable. Hold the spare upright so that the tire's tread is on the ground and the valve stem is at the top of the wheel and facing away from the rear of the vehicle. Lowering/Raising Spare Tire NOTE: Assemble components 2 and 3 by seating the small ball at the end of component 2 in the small hole at the end of component 3. This will lock these components together. Assemble components 1 and 2 so that the wheel nut socket at the end of component 1 faces upward when