2008 Dodge Grand Caravan Owner Manual - Page 182

180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting Electronic Speed Control at a Desired Speed When the vehicle has reached the desired speed, press the SET lever downward and then release. Lift your foot off the accelerator and the vehicle will operate at the selected speed. Deactivating Electronic Speed Control A soft tap on the brake pedal or pulling the lever CANCEL toward you, will deactivate the speed control without erasing the set speed memory. Pushing the ON/OFF button to the OFF position or turning OFF the ignition erases the set speed memory. Resuming Speed To resume a previously set speed, raise the lever RESUME/ACCEL upwards and release. Resume can be used at any speed above 25 mph (40 km/h). Varying The Speed Setting When the speed control is SET, speed can be increased by raising and holding the RESUME/ACCEL lever upwards. When released, a new set speed will be established. Raising the lever RESUME/ACCEL upwards once will result in a 1 mph (1 km/h) speed increase. Each time the lever is tapped upwards, speed increases so that tapping the lever three times will increase speed by 3 mph (5 km/h), etc. To decrease speed while speed control is SET, press the lever SET/DECEL downward and hold. Release the lever when the desired speed is reached, and the new speed will be SET. Tapping the lever SET/DECEL downward once will result in a 1 mph (1 km/h) speed decrease. Each time the lever is tapped downward, speed decreases.