1996 Ford Aspire Owner's Manual - Page 194
1996 Ford Aspire Manual
Page 194 highlights
Engine coolant refill procedure When the entire engine cooling system is to be drained and refilled, use the following procedure: 1. 2. Remove the radiator cap. With the engine off and cool, add a 50/50 mixture of recommended engine cooling system fluid and water until the radiator is full. Replace and fully tighten the radiator cap, then unscrew the cap to the first stop. Start and idle the engine until the radiator upper hose is warm (this indicates the thermostat is open and engine coolant is flowing through the entire system). When you are done, stop the engine and tighten the cap completely. 3. 4. 5. Checking hoses Check all engine and heater system hoses and hose connections for deterioration, leaks, and loose hose clamps as specified in the maintenance schedule. Repair or replace with Motorcraft hoses or equivalent as necessary. Windshield Washer Fluid and Wipers Washer Fluid Check the level of the windshield washer fluid every time you stop for fuel. The reservoir for the windshield washer fluid is located in the engine compartment. To check the washer fluid level, place your finger over the hole in the reservoir cap and pull out the dipstick. 195