1996 Ford F250 Owner's Manual - Page 17

To switch the retractor from the "emergency locking mode" to the "automatic locking mode," perform the following steps: 1. 2. Buckle the lap/shoulder combination belt. Grasp the shoulder portion of the belt and pull downward until all of the belt is extracted, and when allowed to retract, a clicking sound will be heard. At this time, the belt retractor is in the "automatic locking mode" (child restraint mode). A clicking sound will continue to be heard as the belt is allowed to retract. This indicates that the retractor is in the "automatic locking mode." 3. NOTE: When the combination lap/shoulder belt is unbuckled and allowed to retract completely, the retractor will switch back to the vehicle sensitive (emergency) locking mode. See the detailed instructions under Safety Seats for Children in this chapter. Combination Lap and Shoulder Belts While your vehicle is in motion, the combination lap and shoulder belt adjusts to your movement. However, if you brake hard, corner hard or if your truck receives an impact of 5 mph (8 km/h) or more, the combination lap/shoulder belt locks and helps reduce your forward movement. The front seat belt systems can also be made to lock by jerking on the shoulder belt. NOTE: The rear belts cannot be made to lock up by jerking on shoulder belt. 14