2000 Ford Expedition Owner's Manual - Page 217
2000 Ford Expedition Manual
Page 217 highlights
Maintenance and care 11. Straighten alignment pins, making them parallel with the outer edges of the attachment standoff. 12. Carefully insert the headlamp assembly into the vehicle making sure the alignment pins are inserted into the proper holes and into the guide ribs. 13. Hold the headlamp assembly snugly against the vehicle and push down on the clips to lock the lamp into place. Replacing front parking lamp/turn signal bulbs 1. Remove the screw and lamp assembly from the vehicle. 2. Rotate the bulb socket counterclockwise and remove from the lamp assembly. 3. Carefully pull the bulb out of the socket and push in the new bulb. 4. Install the bulb socket into the lamp assembly and rotate clockwise. 5. Install parking lamp assembly on vehicle. 6. Push gently until parking lamp assembly seats. 7. Install screw on the lamp assembly. Replacing tail lamp/backup lamp bulbs The tail lamp/backup lamp bulbs are located in the same portion of the tail lamp assembly, one just below the other. Follow the same steps to replace either bulb: 1. Open the liftgate to expose the lamp assembly screws. 2. Remove the two screws from the lamp assembly. 217