2000 Ford Expedition Owner's Manual - Page 91

Controls and features 2. Press 1/2 control within five seconds of step one. 3. Press 7/8 control and 9/0 control at the same time within five seconds of step 2. The system will now only respond to the factory set code. 1 2 3 4 5 6 7 8 9 0 Unlocking the doors with the keyless entry system To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will also illuminate. To unlock all doors, enter the factory set code or personal code (driver door unlocks) and press the 3/4 control within five seconds. Locking the doors with the keyless entry system It is not necessary to enter the factory or personal code prior to locking all doors. To lock the doors: • Press the 7/8 control and the 9/0 control at the same time. Activating/deactivating autolock with the keyless entry system Before following the activation or deactivation procedures, make sure that the anti-theft system (if equipped) is not armed, ignition is off, and all vehicle doors and liftgate window are closed. 1. Enter 5 digit entry code 2. Press and hold 7/8 control 3. Press and release 3/4 control while holding 7/8 control 4. Release 7/8 control. The horn will chirp once if autolock was deactivated or twice (one short and one long chirp) if autolock was activated. To re-activate autolock, repeat steps 1-4. 91