2000 Ford F150 Owner's Manual - Page 239
2000 Ford F150 Manual
Page 239 highlights
Maintenance and care 3. Remove bulb socket from the parking lamp assembly by turning it counterclockwise. 4. Pull bulb straight out of socket and press in the new bulb. 5. Install the bulb socket into the lamp assembly by turning clockwise. 6. Align top and bottom ribs of parking lamp assembly with corresponding slots on front of vehicle. 7. Push gently until parking lamp assembly seats (you will hear a snap). 8. Install screw on lamp assembly. Replacing tail/brake/turn signal/backup lamp bulbs The tail/brake/turn signal and backup lamp bulbs are located in the tail lamp assembly, one just below the other. Follow the same steps to replace either bulb: 1. If equipped, remove tail lamp covers. 2. Open the liftgate to expose the lamp assembly screws. 3. Remove the two bolts from the tail lamp assembly. 4. Carefully pull the lamp assembly from the tailgate pillar to disengage two hidden snap-in retainers. (Flare side tail lamps are not equipped with snap-in retainers.) 239