2003 Ford Crown Victoria Owner's Manual - Page 174

Roadside Emergencies Refer to Air suspension system in the Driving chapter of the Owner's Guide for more information. 4. Remove the lug wrench from the jack. Rotate the lug wrench socket out from the handle. A 5. Locate pry off notch (if equipped) and remove the center ornament from the aluminum wheel with the tapered end of the wheel nut wrench that came with your vehicle. Insert and twist the handle, then pry against the wheel. 6. If equipped with a full wheelcover, remove the wheelcover center ornament then loosen the five black plastic nuts which retain the wheelcover using the lug wrench. 7. Loosen each wheel lug nut one-half turn counterclockwise but do not remove them until the wheel is raised off the ground. Before placing the jack under the vehicle, NOTE the jack location markings: JACK LOCATION-FRONT The jack location markings can be found on the lower outer edge of the body. • Locate the jack locator mark (B circle) on the body (C) near the tire you are changing, then place the jack (D) under the frame (A) of the vehicle aligning it with the mark (B - circle). 174 2003 Crown Victoria (cro) Owners Guide (post-2002-fmt) USA English (fus)