2004 Ford Freestar Owner's Manual - Page 105

Locks and Security The following items may prevent the vehicle from starting: • Large metallic objects. • Electronic devices on the key chain that can be used to purchase gasoline or similar items. • A second key on the same key ring as the coded key. If any of these items are present, you need to prevent these objects from touching the coded key while starting the engine. These objects cannot damage the coded key, but may cause a momentary "no start" condition if they are too close to the key when starting the engine. If a problem occurs, turn the ignition to the 2 (OFF) position and restart the engine with all other objects on the key ring held away from the ignition key. Check to make sure the coded key is an approved Ford coded key. If your keys are lost or stolen, you will need to do the following: • Use your spare key to start the vehicle, or • Have your vehicle towed to an authorized Ford dealer or a locksmith. The key codes will need to be erased from your vehicle and new codes will need to be re-coded. Replacing coded keys can be very costly and you may want to store an extra programmed key away from the vehicle in a safe place to prevent an unforeseen inconvenience. The correct coded key must be used for your vehicle. The use of the wrong coded key may lead to a "no start" condition. If an unprogrammed key is used in the ignition, it will cause a "no start" condition. Programming spare keys A maximum of eight keys can be coded to your vehicle. Only SecuriLock keys can be used. To program a coded key yourself, you will need two previously programmed coded keys (keys that already operate your vehicle's engine) and the new unprogrammed key(s) readily accessible for timely implementation of each step in the procedure. If two previously programmed coded keys are not available, you must bring your vehicle to your dealership to have the spare coded key(s) programmed. 105 2004 Freestar (win) Owners Guide (post-2002-fmt) USA English (fus)