2004 Ford Freestar Owner's Manual - Page 99

Locks and Security Deactivating/activating perimeter lamps You may enable/disable this feature by having your vehicle serviced by your authorized dealer. You may also perform the following power door lock sequence to enable/disable the perimeter lamps feature: 1. Turn the ignition to the 4 (ON) position, then press the power door unlock control 3 times. 2. Turn the ignition to the 3 (OFF) position, then press the power door unlock control 3 times. 3. Turn the ignition to 4 (ON) position. Completing the sequence within 30 seconds enters a program mode and is confirmed by a horn chirp. Activating or deactivating perimeter lighting once in program mode is accomplished by: • Pressing the power door unlock control twice within five seconds. At this point, perimeter lighting will be activated if it was previously deactivated, and deactivated if it was previously activated. Confirmation of perimeter lighting being activated is provided by a short horn chirp followed by a long horn sound; Confirmation of perimeter lighting being deactivated is provided by a short horn chirp only. • Exiting the program mode is accomplished by turning the ignition to any position other than the 4 (ON) position, or two minutes elapsing since the program mode was entered. Note: The puddle lamps cannot be deactivated. Performing this deactivation procedure will only deactivate the head, park and tail lamps. Autolock This feature automatically locks all vehicle doors when: • all doors are closed, • the ignition is in the 4 (ON) position, • the brake is pressed before reaching 5 km/h (3 mph), and • the vehicle is traveling more than 5 km/h (3 mph). 99 2004 Freestar (win) Owners Guide (post-2002-fmt) USA English (fus)