2005 Ford Five Hundred Owner's Manual - Page 135
2005 Ford Five Hundred Manual
Page 135 highlights
Tires, Wheels and Loading Increasing the inflation pressure beyond this pressure will not increase the tire's load carrying capability. kPa: Kilopascal, a metric unit of air pressure. PSI: Pounds per square inch, a standard unit of air pressure. Cold inflation pressure: The tire pressure when the vehicle has been stationary and out of direct sunlight for an hour or more and prior to the vehicle being driven for 1 mile (1.6 km). Recommended inflation pressure: The cold inflation pressure found on the Safety Compliance Certification Label located on the B-Pillar or the edge of the driver's door. B-pillar: The structural member at the side of the vehicle behind the front door. Bead area of the tire: Area of the tire next to the rim. Sidewall of the tire: Area between the bead area and the tread. Tread area of the tire: Area of the perimeter of the tire that contacts the road when mounted on the vehicle. Rim: The metal support (wheel) for a tire or a tire and tube assembly upon which the tire beads are seated. INSPECTING AND INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properly inflated. Remember that a tire can lose up to half of its air pressure without appearing flat. Every day before you drive, check your tires. If one looks lower than the others, use a tire gauge to check pressure of all tires and adjust if required. At least once a month and before long trips, inspect each tire and check the tire pressure with a tire gauge (including spare, if equipped). Inflate all tires to the inflation pressure recommended by Ford Motor Company. 135 2005 Five Hundred (500) Owners Guide (post-2002-fmt) USA (fus)