2006 Ford Fusion Owner's Manual - Page 235
2006 Ford Fusion Manual
Page 235 highlights
Maintenance and Specifications • 3.0L V6 Engine 1. Start the engine and let it run until it reaches normal operating temperature (the engine coolant temperature gauge indicator will be near the center of the normal area between H and C). 2. While the engine idles, turn the steering wheel left and right several times. 3. Turn the engine off. 4. Check the fluid level in the reservoir. It should be between the MIN/MAX or upper and lower lines. Do not add fluid if the level is in this range. 5. If the fluid is low, add fluid in small amounts, continuously checking the level until it reaches the range between the MIN/MAX or upper and lower lines. Be sure to put the cap back on the reservoir. BRAKE/CLUTCH FLUID Brake and clutch systems are supplied from the same reservoir. The fluid level will drop slowly as the brakes wear, and will rise when the brake components are replaced. MAX Fluid levels between the "MIN" and "MAX" lines are within the normal operating range; there is no need to add fluid. If the fluid levels are MIN outside of the normal operating range the performance of your brake system could be compromised; seek service from your authorized dealer immediately. 235 2006 Fusion (fsn) Owners Guide (post-2002-fmt) USA (fus)