2006 Ford Fusion Owner's Manual - Page 47
2006 Ford Fusion Manual
Page 47 highlights
Lights 4. Remove the bulb socket by turning it counterclockwise and pulling it straight out. 5. Pull the bulb from the socket and push in the new bulb. 6. Install the bulb socket into the lamp assembly by rotating it clockwise. 7. Carefully push the Trunk Side Panel (dark grey, soft wheelhouse side trim panel) back to the shingle position to the Luggage Scuff Plate (hard molding). 8. Install trunk floor carpeting panel. Replacing high-mount brake lamp bulb 1. Make sure the ignition control is in the LOCK (OFF) position. 2. Open the trunk and reach underneath package tray to locate lamp assembly. 3. Remove the bulb socket by rotating it counterclockwise, then pulling it out of the lamp assembly. 4. Pull the bulb straight from the socket and push in the new bulb. 5. Install the bulb socket into the lamp assembly by rotating it clockwise. Replacing license plate lamp bulbs 1. Make sure the headlamp switch is in the OFF position. 2. Remove the two screws from the license plate lamp assembly. 3. Remove bulb socket by turning counterclockwise. 4. Carefully pull the bulb out from the socket. Install new bulb(s) in reverse order. 47 2006 Fusion (fsn) Owners Guide (post-2002-fmt) USA (fus)