2008 Ford Crown Victoria Severe Duty Police/Fleet Supplement 2nd Printing
2008 Ford Crown Victoria Manual
2008 Ford Crown Victoria manual content summary:
- 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 1
storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation. Copyright © 2007 Ford Motor Company 1 2008 Crown Victoria (cro) Supplement USA (fus) - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 2
Motor Company for fleet sales or service information. The hotline number is (800) 34-FLEET. Ford Fleet Website - Additionally, Ford maintains a website for police and other fleet vehicles. The Ford Fleet website is located at www.fleet.ford.com. 2 2008 Crown Victoria (cro) Supplement USA (fus) - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 3
standard across the Crown Victoria line to reduce parts and manufacturing complexity. Components that are part of the option packages are listed below and on the following pages with a brief outline of their major features and their contribution to overall vehicle performance, handling and usage - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 4
The powertrain control module (PCM) performance and may cause extensive engine damage. Crown Victoria police vehicles are designed to operate in the "Owner Guide." Under no circumstances should the aluminum driveshaft be replaced with a steel driveshaft 2008 Crown Victoria (cro) Supplement USA (fus) - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 5
Ford part number XY-75W140-QL Ford specification WSL-M2C192-A ELECTRICAL Battery - Police The Motorcraft maintenance-free battery normally does not require additional water during its life. However, for severe service usage or in high temperature climates, the electrolyte level should be checked - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 6
/Yellow White/Pink Light Blue/White Yellow - Red/White Gray/White Gauge 18 18 18 14 18 10 14 14 14 18 10 18 Color Red/Black Gray/Black Dark green/Light green Light green Orange/Light green Tan/Yellow Pink Light Blue/White Tan Black/Yellow Red/White Gray/White 6 2008 Crown Victoria (cro) Supplement - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 7
with the red wires is the battery positive, and the terminal with the black wire is the ground. Remove both fuses in the Front PDB before removing the cover to the rear power point. Ensure load devices can be turned off, and are switched off when reinserting fuses. Under no circumstance should the - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 8
devices such as lights and sirens not be installed in the air path of these coolers as they will impact cooling system performance. WHEELS/TIRES/BRAKES Wheel rims-Police To withstand the demands placed on vehicles driven under heavy-duty service conditions, Ford Motor Company installs heavy - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 9
is less than six (6) inches from an imaginary center line of the occupant's body. For more information see the Safety belt extension assembly section in the Owner's Guide. Do not use extensions to change the fit of the shoulder belt across the torso. 9 2008 Crown Victoria (cro) Supplement USA (fus) - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 10
, design or manufacture of such systems, Ford cannot assume responsibility for any adverse effects or damage that may result if you use this equipment. Malfunction of aftermarket electronic equipment should be resolved by the equipment manufacturer. 10 2008 Crown Victoria (cro) Supplement USA (fus) - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 11
Powertrain Control Module (PCM) or PCM harness. Connecting into this system may affect engine and transmission operation. As an example: connection of aftermarket electrical equipment into the brake light circuit or any other circuit which is connected to the PCM, anti-lock brake computer, airbag - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 12
back seat in high-speed rear impacts. • Trunk Equipment Mounting Guide - an outline pattern with recommended fastener mounting locations in the trunk. The guide can be found in the Police Interceptor Modifier Guide and on the Internet at www.fleet.ford 2008 Crown Victoria (cro) Supplement USA (fus) - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 13
using the ЉTrunk Equipment Mounting GuideЉ for proper positioning of fasteners. This guide can be accessed on the www.fleet.ford.com website. The sliding tray can also be used, depending on size, to properly store parts with rigid and sharp edges. 13 2008 Crown Victoria (cro) Supplement USA (fus - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 14
in a Key ON or Engine ON mode by pushing the button underneath the cover. The button can be accessed three ways: 1. Pushing on the cover will release the cover latch, allowing the door to swing open and expose the button; 2. The cover can be pulled open; 14 2008 Crown Victoria (cro) Supplement USA - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 15
a diagnostic check self check and momentarily lights the cluster lamp at Key ON. If the diagnostic lamp stays on refer to the appropriate sections of the Ford service manual for further diagnostic and service procedures. The system is active any time the vehicle is in a Key ON or Engine ON mode - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 16
standard Ford Motor with body armor, door. It is imperative that the officer using the panel as a ballistic shield has the exterior of the door facing the threat. In other words, the officer should be positioned behind the interior portion of the door for ballistic protection. 16 2008 Crown Victoria - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 17
below for proper disposition and recycling of materials: Ceramic Protection Corporation 3905 32nd Street N.E. Calgary, AB T1Y 7C1 Canada When the panels are removed, the ЉBallistic PanelЉ label affixed to the door trim panel must also be removed. 17 2008 Crown Victoria (cro) Supplement USA (fus) - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 18
in the seats. All airbag and equipment mounting zone dimensions are approximate due to different airbag deployment characteristics. No equipment will mount between the side of the front seat and the door trim to block deployment of the side airbag. 18 2008 Crown Victoria (cro) Supplement USA (fus - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 19
120 L 20 10 180 20 200 P RND21 3 Figure 1 1. 9.5 inches (240 mm) from center of airbag door 2. 15.7 inches (400 mm) from center of airbag door 3. 28.5 inches (725 mm) No objects should be placed between the airbags due to airbag variability. 19 2008 Crown Victoria (cro) Supplement USA (fus) - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 20
Airbag Information 1 Figure 2 1. 30.5 inches (775 mm). Cross section through center of vehicle (passenger side shown) 20 2008 Crown Victoria (cro) Supplement USA (fus) - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 21
Airbag Information Figure 3 1. 23.6 inches (600 mm). Front passenger compartment 2. 17 inches (430 mm). Front driver 21 2008 Crown Victoria (cro) Supplement USA (fus) - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 22
Airbag Information Figure 4 (if equipped) 1. 8 inches (200 mm). From out board side of seat 2. 15 inches (380 mm). Forward of seat back Figure 5 (if equipped) 3. 27.5 inches (700 mm). Up from SAB module 22 2008 Crown Victoria (cro) Supplement USA (fus) - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 23
visibility. 2. The airbag door must be kept clear for deployment of airbag 3. Area in front of center console from bottom of ashtray to top of instrument panel (see Figure 2 for dimensions) 4. 11 inches (279 mm) width horizontally centered on ashtray door. 23 2008 Crown Victoria (cro) Supplement - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 24
in front of center console from tunnel up to instrument panel 3. Prisoner screen 4. 10 inches (254 mm) 5. Area on tunnel between seats 6. Height: 8.5 inches (216 mm) 7. 12 inches (305 mm) 8. Area on tunnel beneath center console 9. Tunnel 10. Depth: 1.5 inches (38 mm) 24 2008 Crown Victoria (cro - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 25
Airbag Information 1 4 3 2 Figure 8 1. Area on top of instrument panel. Equipment must not interfere with driver visibility. 2. Area on tunnel between seats 3. 9 inches (229 mm) 4. 12 inches (305 mm) 25 2008 Crown Victoria (cro) Supplement USA (fus) - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 26
, side or rear impact accidents for which airbags are not designed to inflate. • reduce the risk of injury in frontal collisions that are not severe enough to activate the airbag. • reduce the risk of passengers being thrown from the vehicle. 26 2008 Crown Victoria (cro) Supplement USA (fus) - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 27
might result in loss of vehicle control? No. Aggressive pursuit driving conditions do not fit this criteria. Airbags are designed to deploy in moderate to major frontal crashes based on the detection of sudden deceleration by sensors in the vehicle. 27 2008 Crown Victoria (cro) Supplement USA (fus - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 28
28 - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 29
29 - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 30
30 - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 31
31 - 2008 Ford Crown Victoria | Severe Duty Police/Fleet Supplement 2nd Printing - Page 32
32
Severe service conditions
2
Maintenance recommendations
3
Severe duty equipment
4
Airbag Information
18
All rights reserved. Reproduction by any means, electronic or mechanical
including photocopying, recording or by any information storage and retrieval
system or translation in whole or part is not permitted without written
authorization from Ford Motor Company. Ford may change the contents without
notice and without incurring obligation.
Copyright © 2007 Ford Motor Company
Table of Contents
1
2008 Crown Victoria
(cro)
Supplement
USA
(fus)