2008 Ford Mustang Shelby GT500 Supplement 1st Printing
2008 Ford Mustang Manual
2008 Ford Mustang manual content summary:
- 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 1
Alternate calibration Transmission operation Driving through water Ground clearance Washing your vehicle 2 4 8 8 8 9 9 10 Chassis Lug nut torque 11 12 Roadside Emergencies Temporary mobility kit Fuses and relays Wrecker towing 16 16 24 25 Maintenance and Specifications Engine oil Air filter - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 2
! We are confident that our dedication to quality, craftsmanship and customer service will ensure many miles of exhilarating, safe and comfortable driving in your interior and exterior enhancements. This supplement complements your Mustang Owner's Guide and provides information specific to - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 3
Ford Special Vehicle Team (SVT) was established in 1991 to "Polish the Ford Oval" by creating low-volume, factory-produced vehicles designed for those select few whose idea of driving is a high-powered, passionate experience - not just a means of getting from point A to point B. In a move to support - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 4
F1 Supercar • Specially tuned exhaust system with X pipe • Unique front fascia, rear fascia, splitter, fog lamps, hood with functional air extractors, decklid spoiler • Flat blade wiper system • Unique cluster with boost gauge and programmable performance shift indicator 4 2008 05+ Mustang (197 - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 5
shift boot and parking brake handle • I/P appliques, door panels, and scuff plates SHELBY GT500 INSTRUMENT CLUSTER Upshift Illuminates when it is best to shift to the next highest manual transmission bright orange when the desired shift point is reached. The SHIFTTONE feature uses an audible tone - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 6
feature functions independently of the ). The Upshift Indicator will still fuel economy Upshift Indicator ( illuminate when it is best to shift to the next highest gear to maximize fuel economy regardless of the Performance Shift Indicator Settings. 6 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 7
is turned to ON or START and will then return to the previously chosen color. For instructions on how to set the instrument cluster display color or MyColor™, refer to Message Center - Display Color in the Driver Controls chapter in the Owner's Guide. 7 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 8
ALTERNATE available. MANUAL 6 SPEED TRANSMISSION OPERATION Using the clutch The manual transmission brake pedal and release the parking brake. 4. Move the gearshift lever to 1st gear, then slowly release the clutch pedal while slowly pressing on the accelerator. During each shift the transmission is - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 9
indicative of any abnormal issues with your vehicle. DRIVING YOUR SHELBY GT500 THROUGH WATER The Ford Shelby GT500 has aerodynamic devices attached to the underbody designed to help control airflow for the front and rear as vehicle damage could occur. 9 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 10
your vehicle through an automated, commercial car wash due to the vehicle's low ground clearance, tire width and track. Wash your vehicle by hand, with a commercial wand, or by using a touchless commercial wash with no mechanical tracks on the floor. 10 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 11
car specification with a torque wrench. • Inspect your wheels for damage on a regular basis. If a wheel is damaged, replace it immediately. • In the event that you encounter an abnormally harsh impact, inspect the outer diameter of your wheels, both inside and out, for damage. 11 2008 05+ Mustang - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 12
and only operate your SVT vehicle at high speeds at locations equipped and designed to do so safely. Before operating 100 135 * Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners. When a 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 13
optimized for performance in both wet and dry conditions. Ford does not recommend using the original equipment tires when damage your vehicle. • For tire pressures, see the placard located on the B-pillar inside the driver's door. • Always maintain 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 14
is damaged, replace it immediately following section Tire rotation. • When replacing tires, the only way to assure rating and load rating and be replaced as a set of four. Never dry and wet conditions. Expect handling, steering and braking to be degraded. • Do Scheduled maintenance guide will help - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 15
Note: If your tires show uneven wear, ask an authorized dealer to check for and correct any wheel misalignment, tire imbalance or mechanical problem involved before tire rotation. Note: After having your tires rotated, inflation pressure must be checked and adjusted to the vehicle requirements. 15 - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 16
or is totally flat. Only punctured areas located within the tire tread can be sealed with the temporary mobility kit. Loss of air pressure may adversely affect tire performance. For this reason: • Do not drive the vehicle above 50 mph (80 km/h). 16 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 17
the expiration date. The expiration date is labeled on the unit. • Do not store the temporary mobility kit inside the passenger compartment of the vehicle as it may cause injury during a sudden stop or collision. Store the kit in its proper location. 17 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 18
cable with the electrical plug (2) from the kit's storage compartment (3). 2. Remove the valve cap from the punctured tire, then screw the hose firmly onto the tire's air valve. 3. Insert the electrical plug into the vehicle's dash mounted power point. 18 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 19
not place it over any airbag cover. 6. Start the engine (only if the vehicle is outdoors or in a well-ventilated area) to prevent the vehicle's battery from draining. Do not 7. Turn the air compressor on by pressing the "I" side of the orange button. 19 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 20
car must not be driven. Call for roadside assistance. 9. Once the tire pressure reaches the recommended placard pressure, quickly unscrew the hose from the tire's air kit back in the original location. You will need it again to check the tire's air pressure 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 21
• Start the engine (only if the vehicle is outdoors or in a well-ventilated area) to prevent the vehicle's battery from draining. • Insert the electrical plug into the vehicle's power point. • Read the air pressure gauge on the temporary mobility kit. 21 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 22
compressor off by pressing the "O" side of the orange button, then unscrew the hose from the tire's air valve, reinstall the tire valve cap, unplug the electrical plug from the power point and stow the temporary mobility kit in its original location. 22 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 23
. 6. Read the air pressure gauge on the temporary mobility kit. If the tire pressure needs to be increased, operate the air compressor and inflate the tire to the recommended pressure as indicated on the label on the B-Pillar or the edge of the driver's door. 23 2008 05+ Mustang (197) Supplement - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 24
by the power distribution box. Fuse/Relay Fuse amp location rating 1 - 2 - 3 - 4 - 5 10A 6 15A 7 - 8 - 9 - 10 - Description Not used Not used Not used Not used Intercooler Pump Fuel Pump #2 Left HID Right HID Fuel Pump #2 S.C. Intercooler Pump 24 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 25
your vehicle towed, contact a professional towing service or, if you are a member, Ford Motor Company produces a towing manual for all authorized tow truck operators. Have your tow truck operator refer to this manual for proper hook-up and towing procedures for your vehicle. 25 2008 05+ Mustang - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 26
Roadside Emergencies Transportation instructions When towing the vehicle, ensure that you use two mini J hooks and attach them to the crossmember oblong holes as shown. Other methods may damage the vehicle. 26 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 27
Roadside Emergencies Wheel lift When towing the Shelby GT500, for front loading, the front tires must be 16 in. (41 cm) higher than the rear. For rear loading, the rear tires must be 14 in. (36 cm) higher than the front. 27 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 28
Roadside Emergencies Flatbed 3 2 1 1. 36 in. (91 cm) 4x4 loading block 2. 18 in. (45.72 cm) 4x4 loading block 3. 11.5° maximum 28 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 29
Maintenance and Specifications 5.4L DOHC SUPERCHARGED V-8 ENGINE 1 2 3 4 12 11 10 9 8 7 6 5 1. Battery 2. Supercharger 3. Engine oil dipstick 4. Brake fluid reservoir 5. Air Filter Assembly 6. Power Steering Fluid Reservoir 7. Intercooler coolant reservoir 8. Engine coolant reservoir 9. - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 30
. They are unnecessary and could lead to engine damage that is not covered by Ford warranty. Change your engine oil and filter according to the appropriate schedule listed in the Scheduled Maintenance Guide. ENGINE AND INTERCOOLER COOLANT The concentration and level of engine coolant should - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 31
Precautions when servicing your vehicle in your Owner's Guide. If the engine coolant has not been checked at the recommended interval, the engine coolant reservoir may become low or empty. If the reservoir is low or empty, add engine coolant to the reservoir. Refer to Adding engine coolant - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 32
Ford specification WSS-M97B44-D with the factory-filled coolant. Mixing Motorcraft Speciality Orange Engine Coolant or any orange-colored extended life product with your factory filled coolant can result in degraded corrosion protection. • A large amount of water without engine coolant may be added - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 33
the pressure relief cap. 9. Check the coolant level in the reservoir before you drive your vehicle the next few times (with the engine cool). 33 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 34
Motorcraft air filter element listed. Refer to Motorcraft part numbers in this chapter. To reduce the risk of vehicle damage and/or personal burn injuries do not start your engine with the air cleaner removed and do not remove it while the engine is running. 34 2008 05+ Mustang (197) Supplement - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 35
between the air filter housing and cover. This could cause filter damage and allow unfiltered air to enter the engine if not properly seated. 6. Replace the air filter housing cover and secure the clamps. MOTORCRAFT PART NUMBERS Component Air filter element Fuel filter Battery Oil filter PCV valve - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 36
Maintenance and Specifications REFILL CAPACITIES Ford Part Name Capacity Motorcraft High Performance DOT 3 Between MIN and Brake fluid Motor Vehicle Brake MAX lines on reservoir Fluid Engine oil (includes Motorcraft 5W-50 Full 6.5 quarts (6.1L) filter change) Synthetic Motor Oil Motorcraft Premium - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 37
axles. 3 The Tremec TR-6060 6-Speed manual transmission on your Shelby GT500 uses MERCON V automatic transmission fluid. Ensure that the correct MERCON V ATF automatic transmission fluid is used as indicated on the label on your transmission. 4 Service refill capacity is determined by filling the - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 38
Specifications Item Rear axle Driveshaft Transmission Gear ratios Description 8.8 in. solid rear axle with limited-slip differential 3.31:1 ratio 2 piece steel Tremec TR-6060 6-speed manual Horsepower Torque Redline Specific output Valvetrain Fuel system 38 2008 05+ Mustang (197) Supplement USA - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 39
Maintenance and Specifications Item Mass air sensor Throttle body Pistons Crankshaft Connecting rods Supercharger Exhaust manifolds Exhaust system Engine drivebelt routing 5.4L DOHC , Roots-type Cast high-silicon, molybdenum iron Dual stainless steel 39 2008 05+ Mustang (197) Supplement USA (fus) - 2008 Ford Mustang | Shelby GT500 Supplement 1st Printing - Page 40
the 120,000 mile Normal Maintenance Schedule outlined in the Scheduled Maintenance Guide. Refer to the Vehicle Service Manual for removal and installation procedures. Replace with Genuine Ford and Motorcraft service parts as needed. These modifications will not necessarily protect your engine from
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
 |
 |
Introduction
2
Shelby GT500 unique features
4
Driving your Shelby GT500
8
Alternate calibration
8
Transmission operation
8
Driving through water
9
Ground clearance
9
Washing your vehicle
10
Chassis
11
Lug nut torque
12
Roadside Emergencies
16
Temporary mobility kit
16
Fuses and relays
24
Wrecker towing
25
Maintenance and Specifications
29
Engine oil
30
Air filter(s)
34
Part numbers
35
Refill capacities
36
A word about warranty coverage
40
All rights reserved. Reproduction by any means, electronic or mechanical
including photocopying, recording or by any information storage and retrieval
system or translation in whole or part is not permitted without written
authorization from Ford Motor Company. Ford may change the contents without
notice and without incurring obligation.
Copyright © 2007 Ford Motor Company
Table of Contents
1
2008 05+ Mustang
(197)
Supplement
USA
(fus)