2011 Ford F450 Super Duty Crew Cab Diesel Supplement 5th Printing - Page 76

2011 Ford F450 Super Duty Crew Cab Manual

Page 76 highlights

76 2011 Diesel (eco) Supplement, 5th Printing USA (fus) Scheduled Maintenance Guide Oil Change Service Interval* 11 12 13 14 15 16 17 18 19 20 Change engine oil and filter Refill diesel exhaust fluid tank Rotate tires, inspect tire wear and measure tread depth; dual rear wheels should only be rotated if unusual wear is observed Inspect air filter restriction gauge, replace filter as necessary Inspect wheels and related components for abnormal noise, wear, looseness or drag Inspect and lubricate steering linkage, ball joints, suspension, tie rod ends, driveshaft, front axle U-joints (4WD vehicles) Perform multi-point inspection (recommended Inspect automatic transmission fluid level Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake Inspect exhaust system and heat shields Oil change service intervals should be completed as indicated by the message center Reset your Intelligent Oil Life Monitor™ after each engine oil and filter change; refer to the Instrument Cluster chapter of the Owner's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95

Oil Change Service Interval*
11
12
13
14
15
16
17
18
19
20
Change engine oil and filter
Refill diesel exhaust fluid tank
Rotate tires, inspect tire wear and measure tread
depth; dual rear wheels should only be rotated if
unusual wear is observed
Inspect air filter restriction gauge, replace filter as
necessary
Inspect wheels and related components for abnormal
noise, wear, looseness or drag
Inspect and lubricate steering linkage, ball joints,
suspension, tie rod ends, driveshaft, front axle
U-joints (4WD vehicles)
Perform multi-point inspection (recommended)
Inspect automatic transmission fluid level
Inspect brake pads, shoes, rotors, drums, brake
linings, hoses and parking brake
Inspect exhaust system and heat shields
*Oil change service intervals should be completed as indicated by the message center
Reset your Intelligent Oil Life Monitor™ after each engine oil and filter change; refer to the
Instrument Cluster
chapter
of the
Owner’s Guide
Scheduled Maintenance Guide
76
2011 Diesel
(eco)
Supplement, 5th Printing
USA
(fus)