2012 Ford Mustang Shelby GT500 Supplement 2nd Printing

2012 Ford Mustang Manual

Get 2012 Ford Mustang PDF manuals and user guides View all 2012 Ford Mustang manuals

2012 Ford Mustang manual content summary:

  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 1
    11 12 12 Chassis Wheels and Tires Wheels Wheel lug nut torque Tire information 13 14 14 14 15 Roadside Emergencies Wrecker towing 19 19 Maintenance Engine oil Air filter(s) Part numbers Refill capacities 23 24 30 30 31 Warranty Coverage 35 1 2012 05+ Mustang (197) Supplement, 1st Printing
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 2
    any time without notice or obligation. No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission. Errors and omissions excepted. © Ford Motor Company 2012 2 2012 05+ Mustang (197
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 3
    and the Mustang Owner's Manual, this supplement shall supersede the information found in the Mustang Owner's Manual. If you have any questions or concerns regarding your Shelby GT500, please call the Ford Performance Info Center at 1-800-FORD-SVT (367-3788). 3 2012 05+ Mustang (197) Supplement
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 4
    engine speed to 4,000 rpm for the first five consecutive miles of vehicle operation or 50 engine start/warm up cycles. This feature is enabled prior to shipment. If neither of these conditions have been satisfied prior to customer delivery, full power will not be available. 4 2012 05+ Mustang (197
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 5
    32V Supercharged V-8 engine with intercooler - 550 horsepower @ 6,200 rpm, 510 lb-ft torque @ 4,250 rpm SAE certified • Low-restriction, cold air intake system • SVT tuned 2.75" exhaust system with 4-inch tips • Engine oil cooler • TR-6060 6-speed manual transmission • Twin disc clutch • Anti-lock
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 6
    55 rear axle ratio (3.73 rear axle ratio included on the optional performance package) • Short-throw shifter • Flat blade wiper system • AdvanceTrac௡ Stability Enhancement System with sport mode specifically calibrated and race track tuned. Refer to the Driving section in your Owner's Guide for more
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 7
    to the next highest manual transmission gear to maximize fuel economy. Multi-shift indicators: 1. (Upshift): Set for maximum fuel economy 2. SVT: Performance shift indicator Performance shift indicator Your vehicle is equipped with a programmable performance shift indicator. When activated, this
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 8
    functions independently of the . The upshift indicator will still fuel economy upshift indicator illuminate when it is best to shift to the next highest gear to maximize fuel economy regardless of the performance shift indicator settings. 8 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 9
    is turned to on or start and will then return to the previously chosen color. For instructions on how to set the instrument cluster display color or MyColor™, refer to Message center in the Instrument Cluster chapter of the Owner's Guide. 9 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 10
    transmission. Do not attempt to shift when the drive wheels do not have traction. Do not drive with your foot resting on the clutch pedal or use the clutch pedal to hold your vehicle at a standstill while waiting on a hill. These actions will reduce the life of the clutch. Your vehicle is equipped
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 11
    very slowly. Never drive through water that is higher than the bottom of the wheel rims. Water may enter through the air intake due to the vacuum generated in the engine. Damage caused by the intake of water in the engine is not covered by the warranty. 11 2012 05+ Mustang (197) Supplement, 1st
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 12
    , when crossing speed bumps or driveway curbs, SVT recommends approaching at a 45 degree angle to reduce the risk of vehicle damage. WASHING YOUR SHELBY GT500 Do not drive your vehicle through on the striped surfaces or stripe edges. 12 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 13
    MacPherson strut with L-arm front suspension • 8.8 inch solid rear axle with limited slip differential (3.55:1 ratio standard, 3.73:1 ratio optional)) Coupe stabilizer bars: • 33.2 x 5.0 mm • 34.0 N/mm front and 31.5 N/mm rear optional 13 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 14
    the outer diameter of your wheels, both inside and out, for damage. Operating at high speeds Your SVT vehicle is capable of high speeds and is equipped with tires rated for the vehicle's maximum speed, electronically limited to 155 mph (250 km/h). Remember to drive safely, obey all traffic laws
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 15
    in both wet and dry conditions. Ford does not recommend using the original equipment tires when temperatures drop to approximately 40°F (5°C) or below (depending on tire wear and environmental conditions) or in snow/ice conditions. 15 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 16
    tires, the only way to ensure original performance is to use the original equipment tire. If a different tire is used, it should be the same size, speed rating and load rating and be replaced as a set of four. Never mix tire brands. 16 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 17
    periods and before use as outlined in the owner's guide. Ford does not recommend using these high performance summer tires when temperatures drop to approximately 40°F (5°C) or below, or in snow/ice conditions. Winter driving The original equipment tires on your SVT vehicle are designed for maximum
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 18
    winter tires. Never perform high speed driving with winter tires. Please call the Ford Performance Info Center at 1-800-FORD-SVT (367-3788) for specific winter tire recommendations. Tire rotation Because your vehicle is equipped with unique larger tires on the rear wheels, you can only rotate the
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 19
    towing service. It is recommended that your vehicle be towed with a wheel lift and dollies or with flatbed equipment. When Ford Motor Company has not approved a slingbelt towing procedure. Note: If the vehicle is towed by other means or incorrectly, vehicle damage may occur. 19 2012 05+ Mustang
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 20
    Roadside Emergencies Transportation Instructions When towing the vehicle, make sure that you use two mini J hooks and attach them to the crossmember oblong holes as shown. Other methods may damage the vehicle. 20 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 21
    Roadside Emergencies Wheel Lift When towing the Shelby GT500, for front loading, the front tires must be 16 in. (41 cm) higher than the rear. Rear lift towing is not recommended, as vehicle damage may occur. 21 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 22
    . Vehicle damage may occur with greater angles. 1. 36 in. (91 cm) 4x4 loading block 2. 18 in. (45.72 cm) 4x4 loading block 3. 11.5° maximum 22 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 23
    2. Supercharger 3. Engine oil dipstick 4. Brake fluid reservoir 5. Air filter assembly 6. Intercooler coolant reservoir 7. Engine coolant reservoir 8. Engine oil filler cap 9. Windshield washer reservoir 10. Power distribution box 23 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 24
    . They are unnecessary and could lead to engine damage that is not covered by Ford warranty. Change your engine oil and filter according to the appropriate schedule listed in gear. 4. Open the hood. Protect yourself from engine heat. 24 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 25
    " level in the coolant reservoir. If the level falls below, add coolant per the instructions in the Adding coolant section. Your vehicle was factory-filled with a 50/50 • an accurate temperature readout from the engine coolant gauge. 25 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 26
    your vehicle's cooling system can hold, refer to Maintenance product specifications and capacities in this chapter. • Refer to the scheduled maintenance information for service interval schedules. • Be sure to read and understand Precautions when servicing your vehicle in your Owner's Guide. If the
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 27
    add coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly. Also, you can be burned if you spill coolant on hot engine parts added, in case of emergency, to reach a vehicle service location. In this instance, the cooling system not add extra
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 28
    cap. The cooling system is under pressure; drive your vehicle the next few times (with the engine cool). 10. If necessary, add a 50/50 mixture of coolant and distilled water to the coolant reservoir until the coolant level is at the "cold fill range" as listed on the reservoir. 28 2012 05+ Mustang
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 29
    next few times you drive the vehicle. If necessary, add enough 50/50 concentration of coolant and distilled water to bring the liquid level to the proper level. If you have to add more than 1.0 quart (1.0 liter) of coolant per month, have your dealer check the cooling system. Your cooling system may
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 30
    filter housing. 5. Tighten the air filter clamp bolt. MOTORCRAFT PART NUMBERS Component Air filter element Fuel filter Battery Oil filter Spark plugs 30 5.4L Supercharged V8 engine FA-1896 FG-1083 BXT-96R-590 FL-820S AGSF-22FM1 .042-.046 inch (1.07-1.17 mm) 2012 05+ Mustang (197) Supplement, 1st
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 31
    change) Engine coolant1 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus) Intercooler coolant1 VC-3-B (US) CVC-3-B (Canada) / WSS-M97B44-D Rear axle lubricant2 Rear axle fluid friction modifier Fuel tank XY-75W140-QL / WSL-M2C192-A XL-3 EST-M2C118-A - Ford part name or equivalent Motorcraft
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 32
    in water. For vehicles with a cooler, the axle pump must be running to perform the service refill. Fill 1/4-9/16 in. (6-14 mm) below bottom of fill hole. 3 The TREMEC 6060 6-speed manual transmission on your Shelby GT500 uses MERCON௡ V automatic transmission fluid. Make sure that the correct MERCON
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 33
    8.8 in. solid rear axle with limited-slip differential 3.55:1 ratio 3.73:1 ratio (Optional Performance Package) 2-piece steel Tremec TR-6060 6-speed manual with integral clutch housing Gear Ratio 1st 2.98 2nd 1.78 3rd 1.30 4th 1.00 5th 0.74 6th 0.50 Reverse 2.90 33 2012 05+ Mustang (197) Supplement
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 34
    ratio Horsepower Torque horsepower @ 6200 rpm 510 lb-ft torque @ 4250 rpm 6250 rpm fuel shut-off 102 HP per system Mass air sensor Throttle body Pistons Crankshaft Connecting rods Supercharger Exhaust manifolds Exhaust system Engine drivebelt routing 5.4L DOHC Supercharged V-8 34 2012 05+ Mustang
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 35
    in the 150,000 mile (240,000 km) normal maintenance schedule of the scheduled maintenance information before and after track use. Refer to the vehicle service manual for removal and installation procedures. Replace with Genuine Ford and Motorcraft௡ service parts as needed. These modifications
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 36
    the use of genuine Ford replacement parts. Parts other than Ford, Motorcraft௡ or Ford-authorized remanufactured parts that are used for maintenance replacement or for the service of components affecting emission control must be equivalent to genuine 36 2012 05+ Mustang (197) Supplement, 1st
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 37
    ௡ branded replacement parts. These parts meet or exceed Ford Motor Company's specifications, and we stand behind them. Parts installed at your dealership carry a nationwide, 12 month/12,000 mile (20,000 km) parts and labor limited warranty. Your dealer can give you details. 37 2012 05+ Mustang (197
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 38
    Body and door drain holes for obstructions; clean if necessary Cooling system fluid level and coolant strength Door weatherstrips for wear; lubricate if necessary Hinges/latches/outside locks for proper operation; lubricate if necessary Parking brake for proper operation 38 2012 05+ Mustang
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 39
    - Recommended each visit Accessory drive belt(s) Half-shaft dust boots (if equipped) Battery performance Horn operation Clutch operation (if equipped) Radiator, cooler, heater and A/C hoses Engine air filter Suspension component for leaks or damage Exhaust system Steering and linkage Exterior
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 40
    Scheduled Maintenance Guide 40 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 41
    and hoses Inspect exhaust system and heat shields Inspect and lubricate steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints if equipped with grease fittings Inspect cabin air filter (if equipped 67.5 75 108 120 54 60 • • 2012 05+ Mustang (197) Supplement, 1st
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 42
    Tire rotation in the Tire Information chapter 135 142.5 150 216 228 240 108 114 120 • • • 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus) Scheduled Maintenance Guide Miles (x 1,000) Kilometers (x 1,000) Months Change engine oil and filter For tire rotation schedule, refer to Inspect
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 43
    ) Every 150,000 miles (240,000 km) Replace cabin air filter (if equipped) Replace engine air filter Replace fuel filter Replace spark plugs Change engine coolant1 Inspect accessory drive belt(s)2 Change manual transmission fluid Change rear axle fluid Replace accessory drive belt(s) if not replaced
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 44
    Scheduled Maintenance Guide Maintenance Schedule Log DEALER VALIDATION: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER : DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: RO#: DATE: P&A CODE: HOURS: MILEAGE: 44 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 45
    Scheduled Maintenance Guide DEALER VALIDATION: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: : DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: RO#: DATE: P&A CODE: HOURS: MILEAGE: 45 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 46
    Scheduled Maintenance Guide DEALER VALIDATION: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: : DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: RO#: DATE: P&A CODE: HOURS: MILEAGE: 46 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 47
    and/or low-speed driving for long distances as in heavy commercial use such as delivery, taxi, patrol car or livery Inspect frequently, service as - Replace cabin air filter (if equipped) required - Replace engine air filter Every 5,000 miles (8,000 km) - Inspect brake system - Rotate tires, inspect
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 48
    Scheduled Maintenance Guide Special Operating Condition Log DEALER VALIDATION: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: : DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: RO#: DATE: P&A CODE: HOURS: MILEAGE: 48 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 49
    Scheduled Maintenance Guide DEALER VALIDATION: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: : DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: RO#: DATE: P&A CODE: HOURS: MILEAGE: 49 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 50
    service interval is 3,000 mile (4,800 km). Edge/MKX AWD only - vehicles operating off-road in sand during high ambient temperatures must replace the AWD PTU (All-wheel drive Power Transfer Unit) lube every 20,000 miles (32,000 km). Engine air filter & cabin air filter replacement ❑ Engine air
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 51
    Guide ENGINE COOLANT CHANGE RECORD Initial change After initial change Six years or 105,000 miles (168,000 km) (whichever comes first) Every three years or 45,000 miles : P&A CODE: HOURS: MILEAGE: RO#: DATE: P&A CODE: HOURS: MILEAGE: 51 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 52
    33 Lights, warning and indicator ...7 Lug nuts ...14 M Manual transmission fluid capacities ...31 Motorcraft௡ parts ...30 O Octane rating ...29 P Parts (see Motorcraft௡ parts) ...30 S Scheduled Maintenance Guide Normal Scheduled Maintenance and Log ...41 Spark plugs, specifications ...30, 34 2012
  • 2012 Ford Mustang | Shelby GT500 Supplement 2nd Printing - Page 53
    Index T Tires changing ...15 Towing wrecker ...19 Transmission fluid, refill capacities ...31 W Warning lights (see Lights) ...7 Wrecker towing ...19 53 2012 05+ Mustang (197) Supplement, 1st Printing USA (fus)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
Introduction
3
Welcome
3
Breaking-in your vehicle
4
Shelby
°
GT500
°
Unique Features
5
Driving your Shelby
°
GT500
°
10
AdvanceTrac
±
11
Driving through water
11
Ground clearance
12
Washing your vehicle
12
Chassis
13
Wheels and Tires
14
Wheels
14
Wheel lug nut torque
14
Tire information
15
Roadside Emergencies
19
Wrecker towing
19
Maintenance
23
Engine oil
24
Air filter(s)
30
Part numbers
30
Refill capacities
31
Warranty Coverage
35
Table of Contents
1
2012 05+ Mustang
(197)
Supplement, 1st Printing
USA
(fus)