1996 GMC Safari Owner's Manual - Page 270

Front Turn SignalLamps 1. Remove the two screws i t the inside edge of the parkinghurn signal lamp assembly. 2. Remove the lamp assembly. Taillamps 1. Open the rear door. 2. Remove the two screws from behind the door. 3. Squeeze the tab on the side of the lamp socket while turning the socket counterclockwise. 4. Pull the socket out of the lamp assembly. 5. Pull the bulb from the socket. 6. Gently push the new bulb into the socket. 7 . Put the socket back into the lamp assembly and turn it clockwise until it locks. 8. Put the parkingkurn signal lamp assembly back into the vehicle and tighten the screws. 6-40