1996 GMC Savana Van Owner's Manual - Page 15

Replacing the RearSeat 1. Position the seat into the open slots i n both rails. Make sure that the latch levers at the front of the seat are i n the up position. 3. Lower the latch 1eve.r by lifting u p on the release located at the mid-position of each seat support. Check that both sides of the seat are locked securely by trying t o move the seat forward and backward. A click should be heard when the seat is locked in place. 4. At the floor, replace the plastic trim covers i n front of and behind the seat supports. 2. Roll the seat to the set location and lock into place. 5 . Connect the quick release latch plates for the lap shoulder belts by inserting the latch plates into the buckles attached at the outboard positions of the bench seat. 1-7