1998 GMC Suburban Owner's Manual - Page 355

Fuses and Circuit Breakers The wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers and fusible thermal links in the wiring itself. This greatly reduces the chance of fires caused by electrical problems. See "Fuses and Circuit Breakers" in the Index for Inore information. Look a t the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be s~11-e you replace a bad fuse with a new one of the identical size and rating. If you ever have a problem on the road and don't have a spare fuse, you can borrow one that has the same amperage. Just pick some feature o f your vehicle that you can get along without -- like the radio or cigarette lighter -- and use its fuse, if it is the correct amperage. Replace it as soon as you can. Instrument Panel Fuse Block The fuse block access door is on the driver's side edge of the instrument panel. Pull off the cover to access the fuse block. You can remove fuses with a fuse extractor. The fuse extractor is mounted to the fuse block access door. To remove fuses, if you don't have a fuse extractor, hold the end of the fuse between YOLK thumb and index finger and pull straight out. Y ~ L I have spare fuses attached to the inside of may the fuse block access door. These can be used to replace a bad fuse. However, make sure that it is the correct amperage. 6-63