2000 GMC Envoy Owner's Manual - Page 242

NOTICE: To help avoid vehicle damage, do not drive the vehicle before the cable is properly stored. Put the spare tire near the flat tire. To remove the spare, insert the chisel end of the wheel wrench, on an angle, into the hole in the rear bumper. Be sure the chisel end of the wheel wrench connects into the hoist shaft. Turn the wheel wrench counterclockwise to lower the spare tire. Keep turning the wheel wrench until the spare tire can be pulled out from under the vehicle. When the tire has been completely lowered, tilt the retainer at the end of the cable and pull it through the wheel opening. Pull the tire out from under the vehicle. The tools you'll be using include the jack (A) and wheel wrench (B). 5-22