2003 GMC Envoy Owner's Manual - Page 15

Returning the Seats to an Upright Position To return the seat@) to the upright position, do the following: 1. Return the seat to the floor pins by rotating the seat down to reengage the seat hooks. 2. Try to raise the seat to check that it is locked down. 3. Pull the seat back up to return it to the upright position. Be sure to return the seat to the passenger position when you are finished. Never use the third row seat as a seating position while the second row is folded and tumbled. Folding the Third Row Seats 1. Pull up on the handle located on the bottom of the seat cushion to release the seat cushion. 2. Lift up the seat, and then pull it forward. Entry/Exit to/from the Third Row Seat To enter the third row seat, you must fold and tumble the second row seat following the instructions given previously. If you are exiting the third row with no assistance, do the following. 1. Pull the handle on the center of the second row 3. Fold the seatback forward until it is flat. 4. Unhook the elastic loop on the back of the seatback. 5. Fold the panel located on the back of the seatback to make a flat surface. Returning the Seat(s) to an Upright Position To return the seat to its original position, reverse the steps listed in folding the third row seats. seatback down to release and fold the seatback. 2. Reach around to the side of the second row seat and pull the back of the seat lever up to tumble the entire seat. 1-8