2003 GMC Safari Owner's Manual - Page 327

2003 GMC Safari Manual

Page 327 highlights

12,000 Miles (20 000 km) 0 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 0 Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) 0 Check readfront axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking. CI Rotate tires. See Tire lnspection and Rotation on page 5-64 for proper rotation pattern and additional information. (See footnote +.) 0 Change automatic transmission fluid and filterif the vehicle is mainly driven under one or more these of conditions: - In heavy city traffic where the outside temperature regularly reaches90°F (32°C) or higher. - In hilly or mountainous terrain. - When doing frequent trailer towing. - Uses such as found in taxi, police or delivery service. If you do not use your vehicle under anyof these conditions, change the fluid and filter every 50,000 miles (83 000 km). 15,000 Miles (25 000 km) 0 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 0 Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) 0 Inspect engine air cleaner filter if you are driving in dusty conditions. Replace filter if necessary. An Emission Control Service. (See footnote f.) 0 Check rear/front axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking. 0 For Two-Wheel-Drive vehicles only: Clean and repack the front wheel bearings (or at each brake relining, whichever occurs first). 18,000 Miles (30000 km) 0 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 0 Lubricate chassis components (or every 3 months, whichever occurs first).(See footnote#.) 0 Check readfront axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking. 0 Rotate tires. See Tire lnspection and Rotation on page 5-64 for proper rotation pattern and additional information. (See footnote +.) 6-8

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.