2004 GMC Yukon Owner's Manual - Page 216

Business Trip Turn BUSINESS TRIP on or off by pressing the select button. When it is on, you will also be able to scroll through the following by pressing the trip information button: You can also reset the PERSONAL: XX MI, or BUSINESS: XX MI while they are displayed by pressing the reset stem on the cluster. If you press and hold the reset stem or select button for four seconds, the display will show the distance traveled since the last ignition cycle for the personal or business trip. • BUSINESS: XXXXXX.X MI - This shows the current distance traveled since the last reset for the business trip odometer in either miles or kilometers. Odometer Press the trip information button until ODOMETER appears on the display. This shows the total distance the vehicle has been driven in either miles or kilometers. Pressing the reset stem located on the instrument cluster with the vehicle off will also display the odometer. • BUSINESS: XXXX.X GAL - This shows the amount of fuel used for the business trip. • BUSINESS: XX.X MPG - This shows the amount of fuel used for the business trip. • BUSINESS: XXX.X AVG MPH - This shows the vehicle's average speed for the business trip. Hourmeter Press the trip information button to scroll to the hourmeter. The hourmeter shows the total number of hours the engine has run. Pressing and holding the reset stem for about 4 seconds on the instrument cluster will also display the hourmeter after the odometer is displayed when the vehicle is off. • BUSINESS: % ANNUAL - This shows the ratio of business trip miles to annual miles as a percent. To reset personal or business trip information press and hold the select button for approximately one second while in one of the personal or business trip modes. This will reset all of the information for the personal or business trip. 3-58