2005 GMC Savana Van Owner's Manual - Page 15

3. Insert the locking pin into the seat base and push the seat to line up with the pin with the base. The pin with the black cap marked "R" must be installed on the passenger's side and the pin with the gray cap marked "L" on the driver's side. 5. Push the pin with the gray cap marked "L" down until it is in the retaining clip. 6. If the vehicle has a floor mat, put the flap back to its original position. 4. Push the pin with the black cap marked "R" down until it is in the retaining clip. 7. Repeat this procedure for the other seat base. 8. Connect the quick-release latch plates for the lap-shoulder belts by inserting the latch plates into the buckles attached at the outboard positions of the bench seat. Do not twist the belt. 9. Check that all locking pins are locked into place before operating the vehicle. 1-9