2009 GMC Canyon Owner's Manual - Page 296

Headlamps 3. Turn the bulb socket counterclockwise to remove it from the headlamp assembly and pull it straight out. A. Low-Beam Headlamp/Daytime Running Lamps (DRL) B. High-Beam Headlamp To replace one of these bulbs: 1. Open the hood. See Hood Release on page 5-11. 2. Reach in and access the bulb sockets from inside the engine compartment. 4. Unplug the electrical connector from the old bulb by releasing the clips on the bulb socket. 5. Pull the old bulb straight out. 6. Push the new bulb straight in until it clicks to secure it. 7. Plug in the electrical connector to the new bulb socket. 8. Push the bulb socket straight in and turn it clockwise to secure it in the headlamp assembly. 5-48