2009 GMC Canyon Owner's Manual - Page 343

3. Assemble the wheel wrench, the jack handle extensions, and the jack handle as shown. 4. Insert the chiseled end of the jack handle at a slight angle through the hole in the rear bumper and into the funnel-shaped guide. 5. Turn the wheel wrench clockwise to raise the tire part way up. Make sure the retainer is seated in the wheel opening and the valve stem is pointed down. Continue raising the tire, watch to make sure it does not get caught on anything on the underbody. If the tire does get caught, loosen two or three turns and push and pull the tire and then retighten. Repeat this procedure as many times as needed to ensure proper stowage. 5-95