2009 GMC Canyon Owner's Manual - Page 65

5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 6. If the vehicle does not have a rear seat and the child restraint manufacturer recommends using a top tether anchor, attach the top tether to the top tether anchor. Refer to the instructions that came with the child restraint and to Lower Anchors and Tethers for Children (LATCH) on page 1-45. 7. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it might be helpful to use your knee to push down on the child restraint as you tighten the belt. 8. Tighten the top tether. See Lower Anchors and Tethers for Children (LATCH) on page 1-45. 9. Push and pull the child restraint in different directions to be sure it is secure. 1-61