2010 GMC Sierra 1500 Crew Cab Owner's Manual - Page 281

Engine Hours Press the vehicle information button until ENGINE HOURS displays. This display shows the total number of hours the engine has run. On vehicles with memory recall seats, the first transmitter learned will match driver 1 and the second will match driver 2. A chime will sound indicating that the transmitter is matched. 4. To match additional transmitters at this time, repeat Step 3. Each vehicle can have a maximum of eight transmitters matched to it. 5. To exit the programming mode, you must cycle the key to LOCK/OFF. Relearn Remote Key This display allows you to match Remote Keyless Entry (RKE) transmitters to your vehicle. This procedure will erase all previously learned transmitters. Therefore, they must be relearned as additional transmitters. To match an RKE transmitter to your vehicle: 1. Press the vehicle information button until PRESS V TO RELEARN REMOTE KEY displays. 2. Press the set/reset button until REMOTE KEY LEARNING ACTIVE is displayed. 3. Press and hold the lock and unlock buttons on the first transmitter at the same time for about 15 seconds. Compass Zone Setting This display allows for setting the compass zone. See DIC Compass on page 4‑63 for more information. Compass Recalibration This display allows for calibrating the compass. See DIC Compass on page 4‑63 for more information. Blank Display This display shows no information. 4-57