2010 GMC Terrain Owner's Manual - Page 120

4-28 Instruments and Controls Tire Pressure The display will show a vehicle with the approximate pressures of all four tires. Tire pressure is displayed in either pounds per square inch (psi) or in kilopascal (kPa). Any time the tire pressures are adjusted the system needs to relearn the new pressures. To relearn the tire pressures press V or SET/CLR while the Tire Pressure display is active. The display will ask for confirmation of a relearn. Press w or x to select Yes or No. Then press V or SET/CLR to confirm the selection. See Tire Pressure Monitor System on page 9‑53 and Tire Pressure Monitor Operation on page 9‑55 for more information. Remaining Oil Life This display shows an estimate of the oil's remaining useful life. If "Remaining Oil Life 99%" is displayed, that means 99% of the current oil life remains. When the remaining oil life is low, the "Change Engine Oil Soon" message will appear on the display. See Engine Oil Messages on page 4‑31. The oil should be changed as soon as possible. See Engine Oil on page 9‑10. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule in this manual. See Scheduled Maintenance on page 10‑2 for more information. Vehicle Information Menu Items Press the MENU button until Vehicle Information Menu is displayed. Then press x to scroll through the following menu items: ... Unit Tire Pressure Remaining Oil Life Blank Unit Press V or SET/CLR to enter the unit menu. Then press w or x to switch between US or Metric when the Unit display is active. Press V or SET/CLR to confirm the setting. This will change the displays on the cluster and DIC to either metric or English (US) measurements.