1992 Honda Accord Owner's Manual - Page 142
1992 Honda Accord Manual
Page 142 highlights
Changing a Flat Tire (cont'd) 9. Everytime you install the wheel on the brake hub, use a rag to wipe any dirt off the mounting surface of the hub and the wheel. This will assure a tight, even contact between the wheel and hub. 10. Install the spare, and lug nuts hand tight. 11. Lower the car, remove the jack, then tighten the lug nuts securely in an " X " pattern as shown. 12. Tighten the lug nuts to the recommended torque: 110 N.m(11 kg-m,80 Ib-ft) If a torque wrench was not used, ask an authorized Honda dealer to verify the torque as soon as possible. TIGHTENING TORQUE 110 N.m(11 kg-m.80 Ib-ft)
Changing a Flat Tire (cont'd)
9. Everytime you install the wheel on the brake hub, use a rag to
wipe any dirt off the mounting surface of the hub and the wheel.
This will assure a tight, even contact between the wheel and hub.
10. Install the spare, and lug nuts hand tight.
11. Lower
the
car,
remove
the
jack,
then
tighten
the
lug
nuts
securely in an "X" pattern as shown.
12. Tighten the lug nuts to the recommended torque:
110 N
.
m(11 kg-m,80 Ib-ft)
If a torque wrench was not used, ask an authorized Honda dealer
to verify the torque as soon as possible.
TIGHTENING TORQUE
110 N
.
m(11 kg-m.80 Ib-ft)