2001 Honda Odyssey Owner's Manual - Page 282
2001 Honda Odyssey Manual
Page 282 highlights
Lights 5. Insert the new bulb into the hole, making sure the tabs are in their slots. Pivot the hold-down wire back in place and clip the end into the slot. 6. Install the rubber seal over the back of the headlight assembly. Make sure it is right side up; it is marked "TOP." 7. Push the electrical connector onto the new bulb. Turn on the headlights to test the new bulb. 8. (Driver's side) Reinstall the air intake cover. Replacing the Front Side Marker/ Turn Signal and Parking Light Bulb HOLDING CLIP 1. If you are changing the bulb on the driver's side, start the engine, turn the steering wheel all the way to the right, and turn off the engine. If you are changing the bulb on the passenger's side, turn the steering wheel to the left. 2. Use a flat-tipped screwdriver to remove the two holding clips from the inner fender. 3. Pull the inner fender cover away from the fender and bumper. CONTINUED Maintenance