2001 Honda Odyssey Owner's Manual - Page 283

Lights 4. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. 5. Remove the burned out bulb from the socket by pushing it in and turning counterclockwise until it unlocks. 6. Install the new bulb in the socket. Turn it clockwise to lock it in place. 7. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. 8. Test the lights to make sure the new bulb is working. 9. Put the inner fender in place. Install the two holding clips. Lock each clip in place by pushing on the center. 1. Open the tailgate. Release the covers by inserting a flat-tip screwdriver into the slot until the cover bows slightly. Then pivot the screwdriver 90° and pull it straight out of the slot. 2. Use a Phillips-head screwdriver to remove the taillight assembly mounting screw under each cover. 3. Pull the taillight assembly out of the body by sliding it backward. 4. Determine which of the two bulbs is burned out: stop/taillight/side marker light or turn signal light. Replacing Rear Bulbs (in Fenders) Maintenance