2005 Honda Civic Owner's Manual - Page 173
2005 Honda Civic Manual
Page 173 highlights
Lights, Cleaning the Seat Belts Replacing a High-mount Brake Light Bulb 3. Reinstall the socket. Turn it clockwise until it locks. Make sure the new bulb is working. Cleaning the Seat Belts LOOP BULB SOCKET EXcept U.S. Special Edition models and Canadian REVERB and Si models 1. Open the trunk and remove the socket from the light assembly by turning it one-quarter turn counterclockwise. 2. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. If your seat belts get dirty, use a soft brush with a mixture of mild soap and warm water to clean them. Do not use bleach, dye, or cleaning solvents. Let the belts air-dry before you use the vehicle. 174
Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.
3.
2.
1.
EXcept U.S. Special Edition models and
Canadian REVERB and Si models
Lights, Cleaning the Seat Belts
Replacing a High-mount Brake
Light Bulb
Cleaning the Seat Belts
174
SOCKET
BULB
LOOP