2008 Honda CR-V Owner's Manual - Page 301

Main Menu Table Of Contents Lights, Cleaning the Seat Belts, Floor Mats Cleaning the Seat Belts LOOP Floor Mats Maintenance 4. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 5. Press the brake pedal to make sure the new bulb is working. 6. Put the socket back into the light assembly, and turn it clockwise to lock it in place. 7. Put the cover back on the light assembly. Push it in until it locks in place. If your seat belts get dirty, use a soft brush with a mixture of mild soap and warm water to clean them. Do not use bleach, dye, or cleaning solvents. Let the belts air-dry before you use the vehicle. Dirt build-up in the loops of the seat belt anchors can cause the belts to retract slowly. Wipe the insides of the loops with a clean cloth dampened in mild soap and warm water or isopropyl alcohol. The driver's floor mat that came with your vehicle hooks over the floor mat anchors. This keeps the floor mat from sliding forward and possibly interfering with the pedals. CONTINUED 297 2008 CR- V