2008 Honda Odyssey Owner's Manual - Page 436

Main Menu Table Of Contents Lights Replacing Rear Bulbs (in Rear Pillar) COVER BULBS 6. Test the lights to make sure the new bulb is working. 7. Put the socket back into the light assembly, and turn it clockwise to lock it in place. 8. Install the rear light assembly in the rear pillar. Tighten the two bolts. Snap the bolt covers into position. SOCKETS BOLTS Maintenance 1. Open the tailgate. 2. Remove the two bolt covers on the rear pillar by prying on the bottom edge with a flat-tip screwdriver. Remove the bolts with a Phillipshead screwdriver, and remove the light assembly from the rear pillar. 3. Determine which of the two bulbs is burned out: turn signal or brake/taillight. 4. Remove the socket by turning it one-quarter turn counterclockwise. 5. Remove the bulb by pulling it straight out of its socket. Push the new bulb straight into the socket until it bottoms. 433 2008 Odyssey