2008 Honda Odyssey Owner's Manual - Page 82
2008 Honda Odyssey Manual
Page 82 highlights
Main Menu Table Of Contents Gauges Outside Temperature Indicator On EX and EX-L models This indicator displays the outside temperature in Fahrenheit (U.S. models) or Centigrade (Canadian models). To see the outside temperature, press and release the select/reset knob until the temperature is displayed. The temperature sensor is in the front bumper. The temperature reading can be affected by heat reflection from the road surface, engine heat, and the exhaust from surrounding traffic. This can cause an incorrect temperature reading when your vehicle speed is under 19 mph (30 km/h). When you start your trip, the sensor is not fully acclimatized, therefore it may take several minutes until the proper temperature is displayed. In certain weather conditions, temperature readings near freezing (32°F, 0°C) could mean that ice is forming on the road surface. If the outside temperature is incorrectly displayed, you can adjust it up to 5°F in U.S. models ( 3°C in Canadian models) warmer or cooler. NOTE: The temperature must be stabilized before doing this procedure. To adjust the outside temperature indicator, press and hold the select/ reset knob for 10 seconds. The following sequence will appear for 1 second each: 0, 1, 2, 3, 4, 5, 5, 4, 3, 2, 1, 0 (U.S.) or 0, 1, 2, 3, 3, 2, 1, 0 (Canada). When the temperature reaches the desired value, release the select/ reset knob. You should see the new outside temperature displayed. Instruments and Controls CONTINUED 79 2008 Odyssey