2009 Honda CR-V Owner's Manual - Page 304

Main Menu Table Of Contents Wiper Blades 4. Examine the new wiper blades. If they have no plastic or metal reinforcement along the back edge, remove the metal reinforcement strips from the old wiper blade, and install them in the slots along the edge of the new blade. REINFORCEMENT TOP BLADE 6. Slide the wiper blade assembly onto the wiper arm. Make sure it locks in place. 7. Lower the wiper arm down against the windshield, the passenger's side first, then the driver's side. 5. Place the top of the wiper blade on the end of the blade assembly, and slide the blade onto the assembly in the direction pointed to by the arrow. Make sure the blade is completely installed. Make sure the three rubber tabs inside the blade fit to each notch of the reinforcement, as shown. 300 2009 CR- V