2009 Honda CR-V Owner's Manual - Page 318
2009 Honda CR-V Manual
Page 318 highlights
Main Menu Table Of Contents Changing a Flat Tire WHEEL NUT WRENCH JACK JACKING POINT 5. Take the jack out of the spare tire area. Turn the jack's end bracket counterclockwise to loosen it, then remove the jack by lifting it straight up. 6. Unscrew the wing bolt and take the spare tire out of its well. 7. Loosen each wheel nut 1/2 turn with the wheel nut wrench. 8. Place the jack under the jacking point nearest the tire you need to change. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch. 314 2009 CR- V
Take the jack out of the spare tire
area.
Turn the jack’s end bracket
counterclockwise to loosen it, then
remove the jack by lifting it
straight up.
Unscrew the wing bolt and take
the spare tire out of its well.
Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
6.
5.
7.
8.
Changing a Flat Tire
314
JACK
WHEEL NUT WRENCH
JACKING POINT
2009
CR- V