2009 Honda CR-V Owner's Manual - Page 89
2009 Honda CR-V Manual
Page 89 highlights
Main Menu Table Of Contents Door Locks 3. Push and hold the front of the master door lock switch on the driver's door. You will hear a click. Keep holding the switch until you hear another click (after about 5 seconds). 4. Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position. To program the Drive Lock mode: Locks all doors and tailgate when the vehicle's speed reaches about 9 mph (15 km/h). 3. Push and hold the brake pedal, and move the shift lever out of the Park (P) position. 4. Push and hold the front of the master door lock switch on the driver's door. You will hear a click. Keep holding the switch until you hear another click (after about 5 seconds). 5. Release the switch and, within 5 seconds, turn the ignition switch to the ACCESSORY (I) position. Move the shift lever to the Park (P) position. Instruments and Controls 1. Make sure the shift lever is in the Park (P) position. 2. Turn the ignition switch to the ON (II) position, and make sure to close the driver's door. 6. Turn the ignition switch to the LOCK (0) position. 85 2009 CR- V