2010 Honda CR-V Owner's Manual - Page 138

09/07/16 18:07:12 31SWA630_137 Vents, Heating, and A/C Air flows from the floor vents. When you select , the system automatically switches to fresh air mode. If you switch the mode from or to , the system keeps the A/C on. The A/C indicator will not come on if it was off to start with. To turn off the A/C, press the A/C button to illuminate the indicator, then press it again to turn off the A/C. When you switch to or mode from , the A/C turns off. But if it was on to start with, the A/C stays on. Airflow is divided between the floor vents and defroster vents at the base of the windshield. Air flows from the defroster vents at the base of the windshield. When you select or , the system automatically switches to fresh air mode and turns on the A/C. You cannot turn the A/C off in this mode. Ventilation The flow-through ventilation system draws in outside air, circulates it through the interior, then discharges it through vents near the tailgate. 1. Set the temperature to the lower limit. 2. Make sure the A/C is off. and fresh air mode. 3. Select 4. Set the fan to the desired speed. Using the Heater The heater uses engine coolant to warm the air. If the engine is cold, it will be several minutes before you feel warm air coming from the system. . 1. Select When you select , the system automatically switches to fresh air mode. If you switch the mode from or , the system also automatically turns on the A/C. This helps prevent the windows from fogging up unintendedly. The A/C indicator will not come on if it was off to start with (see the first column on this page). 2. Set the fan to the desired speed. 3. Adjust the warmth of the air with the temperature control dial. 132