2010 Honda CR-V Owner's Manual - Page 169

09/07/16 18:12:45 31SWA630_168 Playing the XM Radio (EX-L model without navigation system) SCAN The scan function gives you a sampling of all channels while in the channel mode. In the category mode, only the channels within that category are scanned. To activate scan, press the SCAN button. The system plays each channel in numerical order for a few seconds, then selects the next channel. When you hear a channel you want to continue listening to, press the button again. Preset You can store up to 12 preset channels using the six preset buttons. Each button stores one channel from the XM1 band and one channel from the XM2 band. To store a channel: 1. Press the XM button. Either XM1 or XM2 will show in the display. Once a channel is stored, press and release the proper preset button to tune to it. CONTINUED 2. Use the tune, seek, or scan function to tune to a desired channel. In category mode, only channels within that category can be selected. In channel mode, all channels can be selected. 3. Pick the preset button you want for that channel. Press and hold the button until you hear a beep. 4. Repeat steps 2 and 3 to store the first six channels. 5. Press the XM button again. Store the next six channels using steps 2 and 3. XM Radio Display Messages ''LOADING'' XM is loading the audio or program information. ''OFF AIR'' The channel currently selected is no longer broadcasting. Features ''UPDATING'' The encryption code is being updated. Wait until the encryption code is fully updated. Channels 0 and 1 should still work normally. ''NO SIGNAL'' The signal is currently too weak. Move the vehicle to an area away from tall buildings, and with an unobstructed view of the southern horizon. 163