2010 Honda CR-V Owner's Manual - Page 375
2010 Honda CR-V Manual
Page 375 highlights
09/07/16 18:49:45 31SWA630_374 Wiper Blades REAR 5. Slide the new blade into the holder. Make sure it is engaged in the slot along its full length. Insert both ends of the blade into the holder. Make sure they are secure. 6. Install the wiper blade assembly onto the wiper arm. Make sure it locks in place. 7. Lower the wiper arm against the windshield. To replace a rear wiper blade: 1. Raise the wiper arm off the rear window. 2. Disconnect the blade assembly from the wiper arm by pivoting the blade assembly upward. 3. Pull one end of the blade out from the holder. Slide the blade out of the holder. 4. Examine the new wiper blades. If they have no plastic or metal reinforcement along the back edge, remove the metal reinforcement strips from the old wiper blade, and install them in the slots along the edge of the new blade. Maintenance 369