2010 Honda CR-V Owner's Manual - Page 48

09/07/16 17:51:10 31SWA630_047 Protecting Infants and Small Children, Selecting a Child Seat Even with advanced front airbags that automatically turn the passenger's front airbag off (see page 33 ), a back seat is the safest place for a small child. If it is necessary to put a forwardfacing child seat in the front, move the vehicle seat as far to the rear as possible, and be sure the child seat is firmly secured to the vehicle and the child is properly strapped in the seat. Selecting a Child Seat When buying a child seat, you need to choose either a conventional child seat, or one designed for use with the Lower Anchors and Tethers for CHildren (LATCH) system. Conventional child seats must be secured to a vehicle with a seat belt, whereas LATCH-compatible seats are secured by attaching the seat to hardware built into each rear seating position in the back seat. Since LATCH-compatible child seats are easier to install and reduce the possibility of improper installation, we recommend selecting this style. In seating positions and vehicles not equipped with LATCH, a LATCHcompatible child seat can be installed using a seat belt. Whatever type of seat you choose, to provide proper protection, a child seat should meet three requirements: 1. The child seat should meet Federal Motor Vehicle Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213. Placing a forward-facing child seat in the front seat can result in serious injury or death if the front airbag inflates. If you must place a forwardfacing child seat in front, move the vehicle seat as far back as possible, and properly restrain the child. Look for FMVSS 213 or CMVSS 213 on the box. 2. The child seat should be of the proper type and size to fit the child. Rear-facing for infants, forwardfacing for small children. 42