2010 Honda CR-V Owner's Manual - Page 71

09/07/16 17:55:36 31SWA630_070 Instrument Panel Indicators Turn Signal and Hazard Warning Indicators The left or right turn signal indicator blinks when you signal a lane change or turn. If an indicator does not blink or blinks rapidly, it usually means one of the turn signal bulbs is burned out (see pages 361 and 363 ). Replace the bulb as soon as possible, since other drivers cannot see that you are signaling. When you press the hazard warning button, both turn signal indicators and all turn signals on the outside of the vehicle flash. High Beam Indicator This indicator comes on with the high beam headlights. For more information, see page 77 . This indicator also comes on with reduced brightness when the daytime running lights (DRL) are on (see page 78 ). Daytime Running Lights Indicator If this indicator comes on when you turn the ignition switch to the ON (II) position and release the parking brake, it means there is a problem with the DRL. There may also be a problem with the high beam headlights. Have your vehicle checked by your dealer. Low Fuel Indicator This indicator comes on as a reminder that you must refuel soon. When the indicator comes on, there are about 2.3 U.S. gal (8.6 ) of fuel remaining in the tank. When the needle reaches E, there is a very small amount of fuel in the tank. Door and Tailgate Open Indicator Instruments and Controls The appropriate indicator comes on in this display if the tailgate or any door is not closed tightly. 65