2010 Honda Insight Owner's Manual - Page 167

Climate Control System Mode Control Windshield Defroster Button Use the mode control button to select the vents the air flows from. Some air will flow from the dashboard vents in all modes. Airflow is divided between the floor and corner vents and the defroster vents at the base of the windshield. Air flows from the floor vents. Airflow is divided between the vents in the dashboard and the floor vents. Air flows from the center and corner vents in the dashboard. This button directs the main airflow to the windshield for faster defrosting. It also overrides any mode selection you may have made. When you select , the system automatically switches to fresh air mode and turns on the A/C. For faster defrosting, manually set the fan speed to high. You can also increase airflow to the windshield by closing the corner vents on the dashboard. When you turn off by pressing the button again, the system returns to its former settings. To remove fog from the inside of the windows, set as follows: . The system 1. Select automatically switches to fresh air mode and turns on the A/C. 2. Adjust the temperature so the airflow feels warm. to help clear the 3. Select rear window. 4. To increase airflow to the windshield, close the corner vents. For faster defogging, manually set the fan speed to high. For your safety, make sure you have a clear view through all the windows before driving. 164 2010 Insight