2010 Honda Insight Owner's Manual - Page 203

Playing the AM/FM Radio (Models with navigation system) SEEK The seek function searches up and down from the current frequency to find a station with a strong signal. To activate it, press and hold the or side of the TUNE bar until you hear a beep, then release it. SCAN The scan function samples all stations with strong signals on the selected band. To activate it, press the SCAN button, then release it. You will see SCAN in the display. When the system finds a strong signal, it will stop and play that station for about 10 seconds. If you do nothing, the system will then scan for the next strong station and play it for 10 seconds. When it plays a station you want to listen to, press the SCAN button again. Preset Each preset button can store one frequency on AM and two frequencies on FM. 1. Select the desired band, AM or FM. 2. Use the tune, seek, or scan function to tune the radio to a desired station. 3. Pick a preset button, and hold it until you hear a beep. 4. Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM. Each preset button's frequency is shown on the bottom of the audio display. 200 2010 Insight