2010 Honda Insight Owner's Manual - Page 402
2010 Honda Insight Manual
Page 402 highlights
If the Engine Overheats 2. If you see steam and/or spray coming from under the hood, turn off the engine. Wait until you see no more signs of steam or spray, then open the hood. 3. If you do not see steam or spray, leave the engine running, and check the high temperature indicator. If the high heat is due to overloading, the engine should start to cool down almost immediately. If it does, wait until the high temperature indicator goes off, then continue driving. 4. If the high temperature indicator stays on, turn off the engine. 5. Look for any obvious coolant leaks, such as a split radiator hose. Everything is still extremely hot, so use caution. If you find a leak, it must be repaired before you continue driving (see Emergency Towing on page 412 ). 6. If you don't find an obvious leak, check the coolant level in the radiator reserve tank (see page 289 ). Add coolant if the level is below the MIN mark. 7. If there was no coolant in the reserve tank, you may need to add coolant to the radiator. Let the engine cool down until the high temperature indicator goes off before checking the radiator. Taking Care of the Unexpected Steam and spray from an overheated engine can seriously scald you. Do not open the hood if steam is coming out. 1. Safely pull to the side of the road. Put the transmission in Park, and set the parking brake. Turn off all the accessories, and turn on the hazard warning lights. CONTINUED 399 2010 Insight